The helmet may get polluted or gave an ugly look through any means, mainly when you use it while driving in heavy rains, in mud pits, or dusty areas. In this case, cleaning a motorcycle helmet is so important to look good on the bike and enhance your helmet’s life span. Here we come up with some Helmet Cleaning Tips which will help you to clean your motorcycle helmet nicely.
No matter whether you are an experienced biker or a new learner, you might end up with a smelly or dirty helmet. The reason is so apparent; firstly, the helmet is specially designed for providing you’re the protection during collisions. Secondly, you can’t avoid dust particles, insects, heat waves, and in the end, rain. All these factors are significant reasons for putting your pretty helmet into an ugly one.
Here are the critical steps while going into cleaning steps
First and most importantly, you have to consider the type of helmet you have. Because of the number of helmets are available in the market with different features. All of them require a particular way to clean them well. For example, if you have a type of helmet whose interiors are changeable, you can de attach them and clean them separately in a pot. While to others, you have to wash them along with your helmet.
Pick-up an Appropriate Cleaning Material
We highly recommend Johnson’s baby shampoo to use to clean your helmet. Let us explain the reason behind this. Firstly, your cleaning agent should be the petroleum-free. Otherwise, it may pick up the color of your helmet while washing. Secondly, the baby shampoo has an excellent ability to clean your visor’s plastic well with shine.
In addition to the above, cleaning your helmet with an appropriate material saves you a lot of effort and time and helps you meet the required results. Mostly the helmets are made-up of unbreakable plastics, which means not every washing detergents work on them well. That’s why you should be very well aware of this fact.
Remove the Parts of the Helmet
Removing the interior and exterior parts of your helmet can make your work easier. In addition to this, many of the helmets come with Bluetooth, antenna, microphone, and other electronic devices. Make sure that you remove them too. Otherwise, they might not work well once you put them in the water along with your helmet. Likewise, some of the professional bikers use a dual-sport helmet, which comes with a peak. Similarly, the flip-up helmets also come with additional visors and chin bars. Removing all these kind of external stuff and lean them separately can put you in much ease while washing your motorcycle helmet
Towel the Helmet Shell
After following the above steps, now pick up a microbial towel and towel your helmet shell. But don’t forget to soak the towel in warm water. It not only gently wash the dust particle and all of the other stuff from the helmet exterior. But also help to wash your helmet effortlessly. Precaution: don’t rub the towel hard. It might put scratches on your face shield or helmet.
Now start the washing process
Toss the Lining into the Washing Machine
Helmets lining is the only part that helps you have a firm grip over your helmet and absorbs face sweat and hair oil. These factors turn them black or smelly, with which you may feel uncomfortable during the ride. The best way is to wash your lining in a washing machine. It requires less time and clean them well and eliminate all the sweat from linings.
On the contrary, if you are not comfortable with a washing machine, then you can wash them well in a bucket, tub, or any appropriate tool you have at the instant. First, put the best washing detergent in the sink and shake it well until it gets soapy. Now put the linings in and let them suck the water well. After 30 minutes, squeeze the lining well and put them in the dryer or air dry.
Clean the Helmet’s Shell
First, take off the face shield and the interior visor, then dip a microbial cloth piece into a soapy mixture. Then, rug your helmet shell gently to excess mud, dust particle, and any other unwanted material. Precautions always use warm water for better results. Moreover, specific cleaning agents can damage the color and vents of your helmet, so be aware of them.
Wash Out the Face Shield
Faceshields are made-up of pure plastic and have a protective coating that protects your eyesight from UV rays. So washing a visor always requires a lot of care and effort. So here are the tips for cleaning a motorcycle helmet’s face shield. Always use warm water. Moreover, don’t use any rough cloth to wipe out the front visor. Otherwise, it may get scratches and damage the protective layer.
Wipe Out the Tinted Visor
Now many of the visors come with a dual or tinted inner visor. Some of the helmets allow you to replace them quickly while the others are not. So the best practice is not to place them out, instead of wiping them out. Spritz the best cleaning solution, and then clean it with the best towel.
Air Dry all Helmet’s Belongings
Now, wait patiently and let the helmet part air dry well. Additionally, you can dry the visors, helmets shell, and another part with the best water sucking cloth. Blow the air with a blower could make this process much easier and faster. So you can practice this exercise as well.
Reassemble the Helmet
Now it’s your turn to reassemble your helmet to enjoy your drive. Don’t forget first to reattach your inner pads and liner first, then go for the visors and the other electronic parts of the helmet. Here is your helmet ready to use; enjoy the motorcycle helmet cleaning tips.
Check your Vents
Water or dirt could bock your vents, blow your vents with a blower and ensure that they work well. Air compressor is a super-easy tool to check them out. After that, adjust them manually or close until you need to ride.
There is no doubt that motorcycle helmet washing practices are not easy, but believe us, you will be an expert in it if you spend some time on it. The above motorcycle helmet cleanings tips will surely help you a lot even if you are the bigger one, so use these tips and tricks to make you’re going easy.
In addition to the above, here we add some more ease to your process. Always use a microfiber rag for cleaning purposes because it will not harm your visors’ protective layer and the color of your helmet’s shell. On the contrary to this, soft cloth pieces can be the second solution.
Warm water washes out the dirt much better than the cold one. Moreover, it requires less time in the cleaning process. Keeping this in mind, we highly recommend you to use warm water for cleaning purposes. Now hope, so the above details tips and tricks along with precautions will be helpful to you.